View VO0600T1_4778307.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
Vishay Semiconductors
High Speed Optocoupler, 10 MBd, SOIC-8 Package
FEATURES
* Choice of CMR performance of 15 kV/s, 5 kV/s, and 100 V/s * High speed: 10 MBd typical
Single channel Dual channel
* + 5 V CMOS compatibility
8 7 6 5
NC A C NC
1 2 3 4
8 7 6 5
VCC VE VO GND
A1 1 C1 C2 A2
2 3 4
VCC VO1 VO2 GND
* Pure tin leads * Guaranteed AC and DC performance over temperature: - 40 C to + 100 C temp. range * Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements * Low input current capability: 5 mA * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
VO0600T, VO0601T, VO0611T
18921-17
VO0630T, VO0631T, VO0661T
DESCRIPTION
The VO06xxT family are single and dual channel 10 MBd optocoupler utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transister output, providing less leakage compared to an open collector Schottky clamped transister output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/s for the VO0601T and VO0631T and 15 kV/s for the VO0611T and VO0661T. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is recommended.
APPLICATIONS
* Microprocessor systemM interface * PLC, ATE input/output isolation * Computer peripheral interface: SPI * Digital fieldbus isolation: CC-Link, DeviceNet, profibus, SDS * High speed A/D and D/A conversion * AC plasma display panel level shifting * Multiplexed data transmission * Digital control power supply * Ground loop elimination
AGENCY APPROVALS
* UL1577, file no. E52744 * CUL-file no. E52744, equivalent to CSA bulletin 5A * DIN EN 60747-5-5 (VDE 0884) available with option 1
ORDER INFORMATION
PART VO0600T VO0601T VO0611T VO0630T VO0631T VO0661T REMARKS 100 V/s, single channel, SOIC-8 5 kV/s, single channel, SOIC-8 15 kV/s, single channel, SOIC-8 100 V/s, dual channel, SOIC-8 5 kV/s, dual channel, SOIC-8 15 kV/s, dual channel, SOIC-8
TRUTH TABLE (positive logic)
LED ON OFF OUTPUT L H
Document Number: 84607 Rev. 1.7, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 913
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER INPUT Average forward current (single channel) Average forward current (dual channel) Reverse input voltage Enable input voltage (single channel) Enable input current (single channel) Surge current Output power dissipation (single channel) Output power dissipation (per channel for dual channel) OUTPUT Supply voltage Output current Output voltage Output power dissipation (single channel) Output power dissipation (per channel for dual channel) COUPLER Isolation test voltage Storage temperature Operating temperature Lead solder temperature for 10 s t = 1.0 s VISO Tstg Tamb 4000 - 55 to + 150 - 40 to + 100 260 VRMS C C C 1 min maximum VCC IO VO Pdiss Pdiss 7 50 7 85 60 V mA V mW mW t = 100 s IF IF VR VE IE IFSM Pdiss Pdiss 20 15 5 VCC + 0.5 V 5 200 35 25 mA mA V V mA mA mW mW
High Speed Optocoupler, 10 MBd, SOIC-8 Package
(1)
TEST CONDITION
SYMBOL
VALUE
UNIT
Solder reflow temperature (2) for 1 min 260 C Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices.
RECOMMENDED OPERATING CONDITION
PARAMETER Operating temperature Supply voltage Input current low level Input current high level Output pull up resistor Logic high enable voltage Logic low enable voltage Fanout RL = 1 k TEST CONDITION SYMBOL Tamb VCC IFL IFH RL VEH VEL N MIN. - 40 4.5 0 5 330 2.0 0.0 TYP. MAX. 100 5.5 250 15 4K VCC 0.8 5 UNIT C V A mA V V -
ELECTRICAL CHARACTERISTICS
PARAMETER INPUT Input forward voltage Reverse current Input capacitance IF = 10 mA VR = 5 V f = 1 MHz, VF = 0 V VF IR CI 1.1 1.4 0.01 55 1.7 10 V A pF TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
www.vishay.com 914
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84607 Rev. 1.7, 06-Oct-08
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
High Speed Optocoupler, 10 MBd, SOIC-8 Package
ELECTRICAL CHARACTERISTICS
PARAMETER OUTPUT High level supply current (single channel) High level supply current (dual channel) Low level supply current (single channel) Low level supply current (dual channel) High level output current Low level output voltage Input threshold current High level enable current Low level enable current High level enable voltage Low level enable voltage VE = 0.5 V, IF = 0 mA VE = VCC, IF = 0 mA IF = 10 mA VE = 0.5 V, IF = 10 mA VE = VCC, IF = 10 mA IF = 10 mA VE = 2.0 V, VO = 5.5 V, IF = 250 A VE = 2.0 V, IF = 5 mA, IOL (sinking) = 13 mA VE = 2.0 V, VO = 5.5 V, IOL (sinking) = 13 mA ICCH ICCH ICCH ICCL ICCL ICCL IOH VOL ITH IEH IEL VEH VEL 2.0 0.8 4.1 3.3 6.5 4.0 3.3 6.5 0.002 0.2 2.4 - 0.6 - 0.8 7.0 6.0 12.0 7.0 6.0 12.0 1 0.6 5.0 - 1.6 - 1.6 mA mA mA mA mA mA A V mA mA mA V V TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Vishay Semiconductors
Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS
PARAMETER Propagation delay time to high output level Propagation delay time to low output level Pulse width distortion Propagation delay skew Output rise time (10 to 90 %) Output fall time (90 to 10 %) Propagation delay time of enable from VEH to VEL Propagation delay time of enable from VEL to VEH TEST CONDITION RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V SYMBOL tPLH tPHL |tPHL - tPLH| tPSK tr tf tELH tEHL MIN. 20 25 TYP. 48 50 2.9 8 23 7 12 11 MAX. 100 100 35 40 UNIT ns ns ns ns ns ns ns ns
Note Over recommended temperature (TA = - 40 C to + 100 C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at TA = 25 C, VCC = 5 V.
VCC Single channel Pulse gen. Zo = 50 t f = t r = 5 ns Input IF monitoring node RM 1 IF 2 3 4 GND VCC 8 VE 7 VOUT 6 5 RL 0.1 F bypass Input IF Output VO monitoring node C L = 15 pF t PHL The probe and Jig capacitances are included in C L t PLH
18964-2
IF = 7.5 mA IF = 3.75 mA 0 mA VOH 1.5 V VOL
Output VO
Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf Document Number: 84607 Rev. 1.7, 06-Oct-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 915
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
Vishay Semiconductors
High Speed Optocoupler, 10 MBd, SOIC-8 Package
Pulse gen. Zo = 50 t f = t r = 5 ns IF 1 Input monitoring node RM 2 3 4
18963-3
VCC 8 RL 7 6 5 0.1 F bypass Output VO monitoring node
CL = 15 PF
Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf
Pulse gen. Zo = 50 t f = t r = 5 ns 1 7.5 mA IF 2 3 4
Input VE monitoring node Single channel VCC 8 VE 7 VOUT 6 GND 5
VCC
RL 0.1 F bypass Output VO monitoring node CL = 15 pF Input VE tEHL tELH Output VO
3V 1.5 V
1.5 V
The probe and Jig capacitances are included in CL
Fig. 3 - Single Channel Test Circuit for tEHL, tELH
18975-2
COMMON MODE TRANSIENT IMMUNITY
PARAMETER TEST CONDITION |VCM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 , Tamb = 25 C(1) Common mode transient immunity (high) |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 , Tamb = 25 C(2) |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min) = 2 V, RL = 350 , Tamb = 25 C(3) |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 , Tamb = 25 C(1) Common mode transient immunity (low) |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 , Tamb = 25 C(2) |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max) = 0.8 V, RL = 350 , Tamb = 25 C(3) Notes (1) For VO0600T and VO0630T (2) For VO0601T and VO0631T (3) For VO0611T and VO0661T SYMBOL |CMH| |CMH| |CMH| |CML| |CML| |CML| MIN. 100 5000 15000 100 5000 15000 10000 25000 10000 25000 TYP. MAX. UNIT V/s V/s V/s V/s V/s V/s
www.vishay.com 916
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84607 Rev. 1.7, 06-Oct-08
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
High Speed Optocoupler, 10 MBd, SOIC-8 Package
Vishay Semiconductors
VCC IF 1 B A VFF 2 3 4 GND Single channel VCC 8 VE 7 6 5 VO 0.5 V RL 0.1 F bypass Output VO monitoring node V CM 0 V VO 5 V VCM (PEAK) Switch AT A: IF = 0 mA VO (min.) Switch AT A: IF = 7.5 mA VO (max.) CMH
VOUT
CML
VCM + Pulse generator ZO = 50
Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity
18976-2
IF Dual channel B 1 A 2 VFF 3 4 GND VCM + Pulse generator Z O = 50 7 6 5 VCC 8 VCC RL 0.1 F bypass Output VO monitoring node
18977-1
Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity
SAFETY AND INSULATION RATINGS
PARAMETER Climatic classification (according to IEC 68 part 1) Comparative tracking index VIOTM VIORM PSO ISI TSI Creepage Clearance Insulation thickness 4 4 0.2 CTI 175 6000 560 350 150 165 TEST CONDITION SYMBOL MIN. TYP. 55/100/21 399 V V mW mA C mm mm mm MAX. UNIT
Note As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits.
Document Number: 84607 Rev. 1.7, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 917
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
Vishay Semiconductors
TYPICAL CHARACTERISTICS Tamb = 25 C, unless otherwise specified
High Speed Optocoupler, 10 MBd, SOIC-8 Package
ICCI - Low Level Supply Current (mA)
1.7
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 - 40 - 20 0 20 40 60 80 100 VCC = 5 V IF = 10 mA VCC = 7 V IF = 10 mA
VF - Forward Voltage (V)
1.6 1.5 1.4 1.3 1.2 1.1 1.0 - 40 - 20 IF = 10 mA
IF = 50 mA IF = 20 mA
IF = 1 mA
0
20
40
60
80
100
17610
Tamb - Ambient Temperature (C)
17614
Tamb - Ambient Temperature (C)
Fig. 6 - Forward Voltage vs. Ambient Temperature
Fig. 9 - Low Level Supply Current vs. Ambient Temperature
ICCH - High Level Supply Current (mA)
1.60 1.55
3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.8 - 40 - 20 VCC = 5 V IF = 0.25 mA VCC = 7 V IF = 0.25 mA
VF - Forward Voltage (V)
1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 0 5 10 15 20 25 30 35 40 45 50
0
20
40
60
80
100
17611
IF - Forward Current (mA)
17615
Tamb - Ambient Temperature (C)
Fig. 7 - Forward Voltage vs. Forward Current
Fig. 10 - High Level Supply Current vs. Ambient Temperature
ITH - Input Threshold on Current (mA)
7
2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 - 40 - 20 RL = 4 k RL = 1 k RL = 350
IR - Reverse Current (nA)
6 5 4 3 2 1 0 - 40 - 20 VR = 5 V
0
20
40
60
80
100
0
20
40
60
80
100
17613-1
Tamb - Ambient Temperature (C)
17616
Tamb - Ambient Temperature (C)
Fig. 8 - Reverse Current vs. Ambient Temperature
Fig. 11 - Input Threshold On Current vs. Ambient Temperature
www.vishay.com 918
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84607 Rev. 1.7, 06-Oct-08
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
High Speed Optocoupler, 10 MBd, SOIC-8 Package
Vishay Semiconductors
ITH - Input Threshold off Current (mA)
2.6 2.5 2.4 2.3 2.2 RL = 4 k 2.1 RL = 1 k 2.0 - 40 - 20 0 20 40 60 80 100 RL = 350
IOH - High Level Output Current (nA)
50 45 40 35 30 25 20 15 10 5 0 - 40 - 20 0 20 40 60 80 100
17617
Tamb - Ambient Temperature (C)
17620
Tamb - Ambient Temperature (C)
Fig. 12 - Input Threshold Off Current vs. Ambient Temperature
Fig. 15 - High Level Output Current vs. Ambient Temperature
VOL - Low Level Output Voltage (V)
0.30
5.5
Vo - Output Voltage (V)
0.25 0.20 0.15
VCC = 5.5 V IF = 5 mA
IL = 16 mA IL = 13 mA
5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 RL = 4 k 0
17621
IL = 10 mA 0.10 0.05 0.00 - 40 - 20 IL = 6 mA
RL = 350 RL = 1 k
0.0 0 20 40 60 80 100 1 2 3 4 5
17618
Tamb - Ambient Temperature (C)
IF - Forward Input Current (mA)
Fig. 13 - Low Level Output Voltage vs. Ambient Temperature
Fig. 16 - Output Voltage vs. Forward Input Current
IOL - Low Level Output Current (mA)
60
tP - Propagation Delay time (ns)
120 tPLH, 4 k 100 80 60 40 20 0 - 40 - 20 tPLH, 350 tPLH, 1 k
50 40 30 20 10 0 - 40 - 20
IF = 5 mA IF = 10 mA
tPHL, 350
tPHL, 1 k tPHL, 4 k
0
20
40
60
80
100
17622
0
20
40
60
80
100
17619
Tamb - Ambient Temperature (C)
Tamb - Ambient Temperature (C)
Fig. 14 - Low Level Output Current vs. Ambient Temperature
Fig. 17 - Propagation Delay vs. Ambient Temperature
Document Number: 84607 Rev. 1.7, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 919
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
Vishay Semiconductors
High Speed Optocoupler, 10 MBd, SOIC-8 Package
tP - Propagation Delay time (ns)
120 100 80 tPLH, 350 60 40 20 0 5 7 9 11 13 15 tPHL, 350 tPHL, 1 k tPHL, 4 k tPLH, 1 k
300
tr, f - Rise and Fall Time (ns)
tPLH, 4 k
tr, RL = 4 k 250 200 150 100 tr, RL = 1 k 50 tr, RL = 350 0 20 40 60 80 100 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k
0 - 40 - 20
17626
17623
IF - Forward Current (mA)
Tamb - Ambient Temperature (C)
Fig. 18 - Propagation Delay vs. Forward Current
Fig. 21 - Rise and Fall Time vs. Ambient Temperature
PWD - Pulse Width Distortion (ns)
50 40 30 20 RL = 1 k 10 0 - 40 - 20 RL = 350 RL = 4 k
300
tr, f - Rise and Fall Time (ns)
tr, RL = 4 k 250 200 150 100 tr, RL = 1 k 50 0 tr, RL = 350 5 7 9 11 13 15 tf, RL = 350 tf, RL = 1 k tf, RL = 4 k
0
20
40
60
80
100
17627
17624
Tamb - Ambient Temperature (C)
IF - Forward Current (mA)
Fig. 19 - Pulse Width Distortion vs. Ambient Temperature
Fig. 22 - Rise and Fall Time vs. Forward Current
PWD - Pulse Width Distortion (ns)
60 50 RL = 4 k 40 30 20 10 0 5 7 9 11 RL = 350 13 15 RL = 1 k tE - Enable Propagation Delay (ns)
60 50 tELH = 4 k 40 30 20 10 tELH = 1 k tELH = 350 tEHL = 350
17625
IF - Forward Current (mA)
tEHL = 1 k tEHL = 4 k 0 - 40 - 20 0 20 40 60 80 Tamb - Ambient Temperature (C) 17628
100
Fig. 20 - Pulse Width Distortion vs. Forward Current
Fig. 23 - Enable Propagation Delay vs. Ambient Temperature
www.vishay.com 920
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84607 Rev. 1.7, 06-Oct-08
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
High Speed Optocoupler, 10 MBd, SOIC-8 Package
PACKAGE DIMENSIONS in inches (millimeters)
0.120 0.002 (3.05 0.05) R 0.010 (0.13)
Vishay Semiconductors
0.050 (1.27) 0.240 (6.10) C L 0.154 0.002 (3.91 0.05) 0.036 (0.91) 0.170 (4.32) 0.260 (6.6) Pin one ID 0.192 0.002 (4.88 0.05) ISO method A 0.004 (0.10) 0.008 (0.20) 0.008 (0.20) 5 max. R 0.010 0.020 0.004 (0.51 0.10)
i178020-3
0.014 (0.36)
0.045 (1.14)
0.016
(0.41) 7 0.015 0.002 (0.38 0.05) 40 0.0585 0.002 (1.49 0.05)
0.125 0.002 (3.18 0.05)
0.050 (1.27) typ. 0.040 (1.02)
(0.25) max.
Lead coplanarity 0.001 max.
2 plcs.
ESD CAUTION
This is an ESD (electro static discharge) sensitive device. Electrostatic charges accumulate on the human body and test equipment and can discharge without detection. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. ESD withstand voltage of this device is up to 1500 V acc. to JESD22-A114-B.
Document Number: 84607 Rev. 1.7, 06-Oct-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 921
VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T
Vishay Semiconductors
High Speed Optocoupler, 10 MBd, SOIC-8 Package
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com 922
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 84607 Rev. 1.7, 06-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of VO0600T1

	To Download VO0600T1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .